The Vespa 50 FL2 (also called in jargon Vespa V because of starvation logo on the cover of the storage compartment) was produced from 1990 to 1992. Next to the PK model is very similar to the 50 HP that follows, from which it differs in the instrument panel from different background color and the number of warning lights, reduced to 3 compared to 4 of the newer model.
Mechanically still has the cast iron cylinder that will instead be replaced by aluminum in HP, is powered by a carburettor Dell'Orto 16/12, is equipped with a three-speed gear and is equipped with an electric starter. It has the crank to put the motion but the latter is only power.
Vespa PK50fl2 - Series description
Vespa PK50fl2 - Technical specification
|Frame type||Rim||Gears||speed km/h||Specification|
|smallframe||10"||1 gears||40 km/h||
Colors white Engine Cylinders / time 2-stroke single cylinder Displacement 49.8 cc Bore and stroke 38.4 X 43 mm Compression ratio 8,8:1 Power / RPM 2.2 hp / 5000 rpm Torque / revs 0.3 kgm \ 3650 Cooling Forced air Distribution rotating Supply Carburetor orchard 16 \ 12 Mixture 2% Ignition electronics Start crank electric Clutch multidisc in oil bath Change 3-speed knob Cycling Frame Monocoque Front suspension Pull rod wheel with coil spring and shock absorber Rear Suspension Coil spring and shock absorber Final Drive Direct Wheels Cantilever interchangeable with disk decomposable Front brake Drum 150 mm Rear brake Drum 150 mm Tires 3.00 X 10 front and rear Dimensions and Weight Length 1675 mm Width 700 mm Seat height 790 mm Wheelbase 1175 mm Tank 5.8 liters Weight 90 Kg Performance claims Speed 'maximum 40 km / h acceleration nd consumption 2 l \ 100 km
Vespa PK50fl2 - VIN numbers; VIN serial numbers; Chassis number
|VIN prefix||Year||VIN Chassis Number||Vespas made|